|
Product |
Description |
| Thriftcast;
Thriftcast Gun |
Floors around furnaces,
splash area. |
|
Thriftcast C |
Coarse version of
Thriftcast |
| Morco Dura Floor |
Excellent floor material with high
strength, exceptional resistance to hot metal splashes.
Superior strength for structural concrete applications. |
|
Morco Dura Grout |
Fine grout material for
pavers. |
| Morco Dura Cast C |
Excellent mix where aluminum hot spills and heavy
loading exist. |
|
Morcocast F |
Mix designed to resist attack from hot cooking oils,
such as cottonseed and peanut oils. |
| Morcocast |
Soaking pit covers, heat treating furnaces, and boilers
or where temperatures don't exceed 2,700°F |
|
Morcocast 45 |
2,500°F general purpose
castable. |
| Morcocast HS-O; Morcocast
HSRC Gun-O |
2,600°F, re-heat furnace
pre-heaters, coke oven quench-houses. |
|
Morcocast HSEC |
Coarse version of
Morcocast HS-O. |
| Morcocast 26 HSEC |
2,600°F, high strength
extra coarse, furnace roofs, sub-hearths, impact resistance. |
|
Morcocast 2800 LI Gun-O |
2,800°F low iron gun
material. |
| Morcocast 2800 NP-O |
Used for special complex shapes,
heating furnace burner blocks and areas where thermal shock
and carbon disintegration are problems. |
|
Morcocast 50-O |
Soaking pit covers, heat treating furnaces, boiler
settings, etc. |
| Morcocast 50C |
Optimized for resistance to cryolite and cryolite-aluminum-alumina
mixture resistance. |
|
Morcocast 50 BB-O |
50% alumina general
purpose castable. |
| Morcocast 55 |
Used in chain sections of rotary kilns and coolers,
cyclones, preheaters, and ash hoppers. |
|
Morcocast 55 HS-O; Morcocast 55 HS Gun-O |
For use in coke oven stand pipes and goose necks, coke
oven fill ports, blast furnace uptakes and down comers, and
dust catchers. |
| Morcocast 55 HS Pump |
Used in chain sections of rotary kilns and cooler lower
sidewalls, car tops in heating furnaces and precast shapes
of various forms. |
|
Morcocast 3000 HS-O |
3,000°F, high strength. |
| Morcocast 3000 N-O |
3,000°F designed to meet navy
specifications for
boiler applications. |
|
Morcocast 3000 NP-O |
3,000°F used for special complex shapes, aluminum furnaces,
heating furnace burner blocks and areas where thermal shock
and carbon disintegration are problems. |
| Morcocast 3000 F |
3,000°F fine grain low iron castable. |
|
Morcocast Torpedo Gun |
Used in gunning torpedo cars. |
| Morcocast 60 |
For use where high temperatures or resistance to molten
metals or slags are factors. |
|
Morcocast 60 HS-O |
Refuse boilers, incinerators, shapes requiring high
strength, dimensional stability, high production rates, to
3,000°F service temperature. |
| Morcocast 60 Gun-O |
An all purpose 3,000°F gunning mix with low iron content
for areas where CO disintegration is a problem.
Re-heat furnace sidewalls and BOF hoods would be examples. |
|
Morcocast 60 BB-O |
60% alumina general
purpose castable. |
| Morcocast 70; Morcocast 70
Gun-O |
Used for arches, furnace doors, and special shapes
exposed to temperatures beyond the temperature limit of
ordinary refractory castables. |
|
Morcocast 70 XHP |
Used in ladles handling molten iron, some steels. |
| Morcocast 70
NA |
70% alumina castables designed for burner
blocks. |
|
Morcocast 70 BB-O |
70% alumina general
purpose castable for burner blocks.. |
| Morcocast 80 BB-O |
80% alumina general purpose castable for
burner blocks.. |
|
Morcocast 85 BB-O |
85% alumina general
purpose castable for burner blocks.. |
| Morcocast Tab S |
A 90% alumina product for areas needing high abrasion
resistance. |
|
Morcocast 90 HS-O; Morcocast 90 HS Gun-O |
Material is designed to permit rapid casting of burner
blocks for tough thermal shock applications. |
| Morcocast 92-90 |
Special applications requiring a tough, corrosion
resistant castable with thermal shock resistance. |
|
Morcocast G |
94% alumina castable. |
| Morcocast 95 |
95% tabular alumina based.
High strength, crack resistant. Wide range of uses. |
|
Morcocast 95 FG |
95% alumina castable where high strength, high
temperature and resistance to abrasion is a factor.
Used as a coil grout. Finer grain size allows easy
casting of thin sections. |
| Morcocast 95 C-O |
Special applications requiring a tough, corrosion
resistant castable with thermal shock resistance. |
|
Morcocast 95 EHS-O; Morcocast 95 EHS Gun-O |
Ammonia plants or other applications where abrasion
resistance and low impurities are necessary for chemical
resistance. |
| Morcocast 97 FC-O |
Special applications requiring a 97% alumina castable
such as burner sections
and spouts. |
|
Morcocast 98T |
Blast furnace tilting runners,
skid rail tiles, burner blocks, well
blocks, impact pads in steel ladles |
| Morcocast FSC-O |
Used in periodic kilns, car type furnace lining doors
and hearths. An economical fused silica castable. |
|
Morcocast WFS |
Material withstands extreme thermal gradients without
thermal stress failure due to a low coefficient of thermal
expansion. |
| Morcocast F14 Gun-O |
Wet bottom ash hopper
linings, flue gas ducts, and other areas where eliminating
joints is helpful. |
|
Morcocast F14 B-O |
Withstands extreme thermal gradients without thermal
stress failure due to a low coefficient of thermal
expansion. |
