|
Product |
Description |
| Feather Lite 1600 |
Can be cast or gunned. Primary back-up insulation
with low thermal conductivity. Can be used in the
place of other insulation blocks. Will form to complex
shells and fill voids when casting. |
|
Feather Lite 25 |
Can be cast or gunned. Primary back-up insulation
with low thermal conductivity. Can be used in the
place of other insulation blocks. Will form to complex
shells and fill voids when casting. |
| Feather Lite 2500 |
Can be cast or gunned. Primary back-up insulation
with low thermal conductivity. Can be used in the
place of other insulation blocks. Will form to complex
shells and fill voids when casting. |
|
Morcolite 35-1800 |
Can replace block insulation in many applications.
Available in fast cast (FC) advantage, allows rapid setting
for form removal in 2-3 hours. |
| Morcolite 22 X-O |
|
|
Morcolite AS |
|
| Morcolite 23 LI Gun-O |
Used in fluid bed combustor back-up linings,
petrochemical transfer and riser back-up linings, waste heat
boiler linings, flue, stack and door linings. |
|
Morcolite 50 X-O |
50lb./ft3 insulating castable. Low K
factor. Available in gun grade. Use for re-heat
furnace back-up linings. |
| Morcolite 50 X Gun-O |
Material has a variety of applications in boilers,
heat-treating furnaces, incinerators and refinery units. |
|
Morcolite 25 X-O |
79lb./ft3 extra strength. Available in
gun grade. |
| Morcocast 25X Gun-O |
|
|
Morcolite 25 LI-O |
Heat treating furnaces, vessels, back-up linings, air
heaters and furnace covers, internal linings of pipes and
duct work. |
| Morco Mud Lite 30 |
Very low iron content and "low" thermal conductivity,
along with very high strength permit use under reducing
atmospheres and thermal shock conditions. |
|
Morcolite 26 SF-O |
Used in soaking pit covers, furnace doors, heat treating
and annealing furnaces, precast shapes, rotary kilns, coke
oven doors, carbon baking furnaces. |
| Morcolite 27 SF-O |
Used in soaking pit covers, furnace doors, heat treating
and annealing furnaces, precast shapes, rotary kilns, coke
oven doors, carbon baking furnaces. |
|
Morcolite 28 X-O |
Material has a variety of applications in boilers,
heat-treating furnaces, incinerators and refinery units. |
| Morcolite 28 HS-O |
Used in soaking pit covers, furnace doors, heat treating
and annealing furnaces, sub-bases on high temperature tunnel
kilns, rotary kilns, coke oven doors, dryer furnaces,
regenerator linings in the FCCU process and high temperature
duck linings. |
|
Morcolite 28 HS Gun-O |
Used in soaking pit covers, furnace doors, heat treating
and annealing furnaces, sub-bases on high temperature tunnel
kilns, rotary kilns, coke oven doors, dryer furnaces,
regenerator linings in the FCCU process and high temperature
duck linings. |
| Morcolite 30 X-O |
95 lb./ft3 insulating castable. Doors
of furnace, available in gun grade. |
|
Morcolite 30 X Gun-O |
Refinery and heat treating burner blocks where thermal
shock and direct exposure to flames or gases are
considerations. |
| Morcolite 30 SF-O |
A 75-90lb./ft3 insulating castable for ladle
preheaters, ladle covers and re-heat furnace doors. |
|
Morcolite CA |
Sub-base on tunnel kiln cars, heat treating furnaces,
furnace doors, back-up linings, air heaters and furnace
covers. |
| Morcolite F14 HS |
Used in backup linings in reheat furnace floors,
annealing furnaces cartops, fired oil heater stacks, carbon
monoxide boiler duct linings, olefin cracking furnace
stacks, boilers, and incinerator back-up linings. |
|
Morcolite 95F |
Bubble and tabular alumina based insulating castable
containing very low amounts of impurities. |
| Morcolite 95 |
Where a very pure, low thermal conductivity light weight
castable, resistant to reducing atmospheres and thermal
shock, is desired. |
|
Morcolite 97 SF-O |
|
| Morcolite 35-60 |
Used where insulating properties are of importance.
Due to the high purity and alumina content this material is
resistant to alkali and halogen gasses. |
|
MORCOLITE 50-2000 |
50 lb./ft3, 2,000oF |
| MORCOLITE 50-2200 GUN |
50 lb./ft3, 2,200oF, gun grade |
|
MORCOLITE 60-2500 |
60 lb./ft3, 2,500oF |
| MORCOLITE 75-2500 |
75 lb./ft3, 2,500oF |
|
MORCOLITE 75-2600 LI |
75 lb./ft3, 2,600oF |
| MORCOLITE 80-2500 |
Medium weight heat insulating high purity castable. |
|
MORCOLITE 88-2500 |
Medium weight heat insulating medium
purity castable. |
| MORCOLITE 100-668 |
Unique medium weight insulating extremely high purity
castable. |
