|
Product |
Description |
| Alligraph 2 |
Setting slide gates or applications demanding a good
strength and abrasion resistance along with low chemical
reactivity. |
|
Fiber Adhesive |
Toweled onto surface of module. |
| Morco Hot Patch S |
Hot patching areas requiring a stiff consistency mortar
with special adhesive and drying qualities. |
|
Morco Level Set |
For glass tanks as a bench leveling clay as patching
compound for sealing cracks in necks, metal line repair,
port bottoms, etc. |
| Morco Silica Hot Patch |
Hot patching areas requiring a stiff consistency mortar
with special adhesive and drying qualities. |
|
Morcobond 95 AS |
Gluing shrouds from bottom to top portion where, most
often, dissimilar ceramic materials must be bounded
together. |
| Morcobond A |
Particularly suited for laying up insulating boards in
tundish boxes. |
|
Morcobond SP-P |
Used in glass tank crowns, coke ovens and chemical
industry, suitable for patching small voids in/or between
shapes in a worn lining. |
| Morcocoat 93 PG |
Extra high alumina-graphite, chemically-bonded mortar,
ready to use for grouting blow pipe into tuyre stock and
collector nozzle bonding. |
|
Morcocoat 95 P |
A very viscous, extra high alumina, chemically bonded
mortar for high temperature patching and bonding. |
| Morcoset |
For boiler and metallurgical furnaces or where a high or
medium duty mortar is desired. |
|
Morcoset S |
45% alumina, air setting mortar ready to use for reheat
furnace brick. |
| Morcoset Super J-2 |
Super duty, heavy consistency, non-shrinking. Can
be diluted to desired consistency. |
|
Morcoset Super J-3 |
Super duty, heavy consistency, non-shrinking. Can
be diluted to desired consistency. |
| Morcoset 50 |
Super duty, all-purpose air set mortar. Extremely
high bonding strength. |
|
Morcoset 50 (Dipping) |
|
| Morcoset 50 Firm |
Laying brick where strong bond and resistance to high
heat are prime requisites. |
|
Morcoset 50 HW 50# |
50% alumina, heat setting mortar ready to use for ladle
nozzle to well block bonding. |
| Morcoset 50 HW (Wint) 50# |
|
|
Morcoset 50 HW 70# |
|
| Morcoset 50 HW (Wint) 70# |
|
|
Morcoset 70 HW (Wint) |
A setting or packing type of heat-setting mortar for
laying up or coating high alumina brick. |
| Morcoset 70 GC |
70% alumina, air setting mortar ready to use for ladle
and tundish back up brick, torpedo car brick. |
|
Morcoset 70 |
70% alumina, air setting mortar ready to use for ladle
and tundish back up brick, torpedo car brick. |
| Morcoset 80 HW |
A heat set mortar of high Alumina content, ready to use
for laying high Alumina brick or coating mag-carbon,
alumina-carbon ladle brick, to prevent graphite oxidation on
new brick preheating. |
|
Morcoset 85 P |
Applications demanding an excellent strength and
abrasion resistance. |
| Morcoset 85 P-F |
|
|
Morcoset 95 P-3 |
For metal line service against molten aluminum where
silica pick up is a problem. |
| Morcoset SIC-2 |
Lay silicon carbide bricks in muffle furnaces, pot
furnaces, retorts, and recuperators, where sufficient
temperature to develop ceramic bond is present. |
|
Morcoset SIC-4 |
|
| Morcoset SG |
For metal line service against molten iron and steel. |
|
Morcoset Z |
Zircon based, coating walls, and laying brick. |
| Regal Bond |
|
