PLASTICS
|
Product |
Description |
| Morco Plastic 55P |
Used in incinerator linings, iron transfer ladles,
reheat furnaces, induction furnace spouts, electrical arc
furnace deltas, and aluminum holding furnace sidewalls and
ramps. |
|
Morco Plastic BR |
73% alumina, mullite base. Upper sidewalls. |
| Morco Plastic BR-AL |
Suitable for highly corrosive and erosive environments. |
|
Morco Plastic BR-PC |
73% alumina, mullite base, patching and veneering. |
| Morco Plastic Mullite |
70% alumina, chemically bonded plastic to re-heat
furnace patching, ramming ladle and tundish wells. |
|
Morco Plastic 75M P Fine |
Mullite and alumina based phosphate bonded high alkali
resistant plastic or plaster. |
| Morco Plastic 12-58 |
A mullite based silicon carbide and zircon containing
phosphate bonded plastic. |
|
Morco Plastic 85 P HS |
High alumina aggregates based, phosphate bonded plastic
with high alkali resistance characteristics. |
| Morco Plastic 85 P |
85% alumina, upper sidewalls, burners, doorjambs, doors. |
|
Morco Plastic 85 P-X |
85% alumina, molten alumina contact, sidewalls, metal
line, burners, doorjambs, doors. |
| Morco Plastic 85 P Fine |
Used in incinerator linings, iron transfer ladles,
reheat furnaces, induction furnace spouts , electrical arc
furnace deltas, and aluminum holding furnace sidewalls and
ramps. |
|
Morco Plastic 90 P CW |
For patching and grouting where high temperatures,
severity of service, slag resistance, abrasion resistance,
etc. are prime considerations. |
| Morco Plastic 90 P |
90% alumina, upper sidewalls, burners, doorjambs, doors. |
|
Morco Plastic 90 P GC |
For extreme service environments such as ramming around
well blocks, ladle fillets, ladle top rings and torpedo car
tops. |
| Morco Plastic 90 P GC-X |
90% alumina, molten alumina contact, sidewalls, metal
line, burners, doorjambs. Very low abrasion loss. |
|
Morco Plastic 90 P Fine W |
90% alumina, patching and veneering. |
| Morco
Plastic 90 PF-AR |
|
|
Morco 90 P-F (Boxes) |
For ramming, patching, or veneering where abrasion and
slag resistance, combined with severity of service, are
prime considerations. |
| Morco Plastic 90 P-T |
|
|
Morco Plastic Z |
Filling expansion joints in silica super-structures,
cold patching of zircon, silica, mullite AZS or basic
super-structures. |
| Morco Plastic SIC (70%) |
Primarily used in acid environments such as cyclone
boilers, incinerators and non-ferrous areas up to 2,800°F. |
|
Morco Plastic SIC (80%) |
Primarily used in acid environments such as cyclone
boilers, incinerators and non-ferrous areas up to 2,800°F. |
| Morco Super Plastic A |
Super duty plastic refractory with low porosity and
permeability, volume stability and strength, prevent gas and
metal penetrations. |
|
Morco Plastic 50 A |
Super duty plastic refractory with low porosity and
permeability, volume stability and strength, prevent gas and
metal penetrations. |
| Morco Plastic 60 A |
60% alumina, upper sidewalls. |
|
Morco Plastic 60 M-A |
60% alumina, upper sidewalls. |
| Morco Plastic 75 H |
Large burner blocks, iron and steel ladles, heat
treating furnaces, soaking pit floors, forge furnaces,
rotary kilns and maintaining other industrial furnaces. |
|
Morco Plastic 70-20 |
80% alumina, molten alumina contact, sidewalls, metal
line, burners, doorjambs, doors. |
| Morco Plastic 80 AH |
80% alumina, burners, doorjambs, doors. |
| Morco Plastic G |
Runners, spouts, troughs and ladles pouring iron and
steel. |
| Morco Plastic 85 G |
Runners, spouts, troughs and ladles pouring iron and
steel. |
|
